***SU ORDINAZIONE*** SUNFLOWER TRIMMER - BUCKER L

Bucking is a very tedious job when done manually.
Bucker L makes the whole bucking process automated, fast and efficient.

With a bucking capacity of as much as 60 kg/hour, Bucker L rapidly speeds up the production.

The first vertical and fully portable bucking system on the market.
With a resistant stainless-steel body, powerful engine, and bucking capacity of as much as 60 kg per hour, Bucker L rapidly speeds up the pre-trimming process. Die holes with four different diameters allow to perfectly buck hemp flowers of different sizes - from massive outdoor stems to tiny side stems.

Two rotating rubber cylinders inside powered by a strong engine with a powerful gearbox provide enough performance at different speeds to deal with stems of almost any thickness. These two cylinders take the stem through the device with the option to adjust their rotation speed for the optimum processing flow. While the stems are dropped at the end of the process, the flowers are collected into a bin or placed directly on the conveyor IN.

With only two control buttons and one round switch, the handling is super easy and safe for anyone.
This system, powered by a high-quality engine, helps to move flowers smoothly through the whole trimming process.

Bucker L is placed on a wheeled Workstation, which makes the whole machine fully portable. Once portability is not an issue, Bucker L can be safely placed on any flat working table.
The overall weight of 45 kg makes Bucker L a robust solution for professional growers of all sizes.

Device size (h,w,d): 136x91x72 cm
Device weight: 80 kg
Wet bucking: 60 kg/h
Input voltage: 230 V
Input frequency: 50 Hz
Motor current: 1,4 A
Motor output: 0.25 kW
Motor IP rating: 55
Motor rotation: 1365 min-1
Gear ratio: 1:10
Nr. of cylinders: 2
Nr. of inlets: 4
Cylinder diameter: 160 mm
Rotation range: 50-500