Description
Innovative exhaust fan with an elegant design for a new level of comfort for bathrooms, showers, kitchens and other residential premises.
The maximum air capacity combined with low noise provides the ideal microclimate.
Body and blades made of high quality and long-lasting plastic, UV-resistant.
The aerodynamic profile of the blades, specially designed, offers high air capacity and low noise.
Compact design allows for wall and ceiling mounting.
The shortened fitting for mounting in a ventilation duct or connection to air ducts ? 100, 125, 150 mm.
The fan is equipped with a valve specially designed to prevent backflow and heat losses.
The fan exhaust incorporates air rectifiers specially designed to reduce turbulence, increase air pressure and reduce noise level.
The high degree of protection at the entrance makes the fan the ideal solution for the ventilation of a bathroom. Electronic components are protected.
Manual control with an ambient light switch. The switch is not included in the delivery set.
The fan is controlled by the built-in cable switch V. Not applied in case of ceiling mounting.
Speed control is possible via a thyristor speed regulator or via the speed switch P2-1-300 (only for VENTS 150 Quiet models), see Electrical accessories. Several fans can be connected to the same controller. Speed regulators cannot be connected to fans with modification T, TH, TP, VT, VTH.
Automatic control:
Via the electronic control unit BU-1-60. The control unit is supplied separately.
Via timer T.
Via the humidity sensor and the TH timer (if the humidity level in the room exceeds the sensor threshold by 60-90%, the fan switches on automatically and runs until the humidity level drops to the standard level, after which the fan continues to operate within the set period of time and shutdown).
Via the motion sensor and the TP timer (if movement is detected in the coverage area, the fan is automatically switched and runs within the set time period from 2 to 30 minutes). Distance up to 4 m, the maximum. viewing angle 100?.
Installation directly inside a ventilation duct.
Connecting the air duct to the exhaust flange with a clamp.
Wall mounting with screws; suitable for ceiling mounting.
Low 7.5 W energy demand thanks to the new high efficiency motor.
Maintenance-free bearings contain enough grease for a 40,000 hour non-stop operation.
Motor equipped with special anti-vibration mounts to absorb vibrations, ensuring silent operation; also equipped with overheating protection.